- Compatibility: The L-bracket is compatible with the FUJIFILM X-S10 and has an anti-twist flange that prevents the camera from twisting and allows a comfortable grip.
- FUNCTION: The side plate of the angle can be pushed forward to get a 180Â° LCD screen, and can be extended to the left if more space is needed for mounting or cable release.
- Versatile mounting: the L-bracket is attached to the bottom of the camera with a 1/4 screw. Both the base plate and side plate of the L-bracket are Arca-compatible dovetails so that the camera can be mounted in vertical or horizontal position.
- Mounting points: with multiple 1/4″-20 threads on the side for accessories such as the HDMI cable clamp 1822. Several 1/4″-20 and 3/8″-16 threaded holes on the bottom are used to attach accessories such as quick release plate.
- Tools: There is a slot at the bottom for attaching a hand strap. A built-in Allen key and a slotted screwdriver are included to secure the camera screw and stored at the bottom of the L bracket.
- [For Sony A7 IV/A7 SIII/A 1]: SmallRig L-Bracket 3660 was designed for Sony Alpha 7 IV/Alpha 7 SIII/Alpha 1. This L-mount allows for quick switching between horizontal and vertical shots while improving the gripping experience. Note: To ensure that the camera’s LCD folding screen can be opened, we make a cut into the side plate. If you use a relatively small and round ARCA clamp, it can be difficult to align it vertically to the optical centre of the camera. We recommend using larger ARCA clamps.
- [Quick Switch]: The bottom of the base mount integrates a Swiss plate for Arca, which allows direct switching to tripod shots, and the quick release plate (pad) for DJI RS 2/RSC 2 stabilisers.
- [Extendable Side Plate]:The side plate is extendable to allow HDMI cables to be installed, and forwards and backwards adjusts to allow 180 degree opening and 120 degree rotation of the Alpha 7 IV/Alpha 7S III LCD screen
- [COMFORTABLE GRIP]: There is a spindle key on the battery flap which adjusts to the camera curvature and leaves room for a little finger for a comfortable grip, and embedded selected genuine leather in the base plate integrates into the camera body
- [ANTI-TWIST]: Mount the camera with a built-in 1/4″-20 screw and a fixing pin on an L-plate. The SmallRig L-Bracket 3660 has an integrated silicone pad to prevent scratches and twists
- The a6600 cage is exclusively designed to provide protection and mounting options for Sony A6600 users especially for V-loggers. It would not block any buttons on the camera and you are able to access not only the battery but even the SD card slot
- Secured tightly via a 1/4â€™â€™ screw on the bottom and a M2.5 screw on the side to prevent the camera from twisting. Rubber pads on the bottom protect your camera body from scratching
- Featuring multiple 1/4â€-20, 3/8â€-16 and Locating holes for ARRI that allows to mount a Top Handle 1638, Monitor Mount BSE2294 and Magic Arm 2070.
- The A6600 cage integrates with two cold shoe mounts with one on the top and the other on the left for microphone and light. Additionally, the cage features strap slots on both sides for carry strap.
- The bottom comes with a flat-head screw driver for quick installation. Optional HDMI Cable Clamp 1693 and Lens Adapter Support 1787 are sold separately if needed.
- SmallRig NP-FZ100 camera battery charger set is available now, two 2040mAh(Real) rechargeable batteries and a charger brings long battery life for your videos and photos shooting, if you need a sufficient power supply, please search SmallRig NP-FZ100 Battery 3824
- SMALLRIG 3089 L Bracket for Sony A7C is designed for a quick switch between horizontal and vertical orientation shooting.
- The L Plate is secures to the bottom of the camera with a 1/4 screw and features a rubber pad to prevent your camera from scratching. It also features an anti-twist pin to prevent twisting.
- Both the base plate and side plate are Arca-type compatible dovetails come with lens center mark, which enables the camera to mount in a vertical or horizontal position.
- The side plate can be moved forward and back and can be extended 24mm to the left if more room is needed for cable release.
- Featuring multiple 1/4″-20 threaded holes on the side for accessory attachment such as Cold Shoe BUC2736. The side plate features 1/4 threaded holes for mounting a stabilizer. The bottom comes with a flat screwdriver and an Allen wrench for quick installation.
- This L plate is compatible with Sony A7m3/ A7r3
- Increase the height of the handheld, update the comfortable hand feeling
- The multifunctional side plate can be removed and extended
- The cold shoe extensions enable to use in any scenes
- No blocking the batteryÂ space
- Cold Shoe Design: Side-Design Cold Shoe, Freely Adjust Screen without Block
- Dual Arca Swiss Quick Release Plate: Support Vertical Shooting
- Addtional 1/4 Screw Camera Strap Port: Allow Your A6600 Compatiable with More Equipment
- Not Block Battery Cover
- Anti-Scratch Anti-Deflection