fbpx

Saramonic Blink 500 B3 Lighting Adapter for IOS Device

Rp1.999.000

In stock

  • Amazingly lightweight, ultracompact and easy-to-use wireless microphone system for iPhone and iPad that provides broadcast-quality sound
  • RXDi dual-channel MFi Certified Lighting receiver is extremely lightweight, space efficient and works perfectly when used in handheld gimbals
  • Clip-On Transmitter has a great sounding built-in mic and it’s small and light enough to clip to shirts and clothing, or you can use the included SR-M1 Professional Lavalier Microphone
  • No technical knowledge of audio is required to use. Operates on the interference-free 2.4GHz spectrum and automatically hops to free channels to avoid static noise and audio dropouts
  • Dual-Channel Receiver can handle mics from two separate people by adding a second Blink 500 TX transmitter (sold separately)
Saramonic Blink 500 B3 Feature:

Receiver Specifications:

  • Frequency: 2.4GHz
  • Oscillator type: Gaussian Frequency-Shift Keying (GFSK)
  • RF Frequency Band: 2400 to 2483.5 MHz
  • Signal to Noise Ratio: ≥70dB
  • Voice Delay: ≤6ms

Pairing Guide of Saramonic Blink500 B3

1. Turn on the transmitter by long pressing the power key

2. Plug the RXDI into an IOS device Please make sure the antenna (yellow side) is oriented on the top of the device, when in landscape mode, to get the best signal

3. Insert the pairing pin into the pairing pin-hole of RXDI, press hard and the pair indicator should be quick flashing at every 0. 5s.

Press both the”+” and “-” button of transmitter TX simultaneously within 10 seconds

4. The kit will be paired when the RX pair indicator is solid blue and the TX pair indicator is flash slowly

Note: To pair the second transmitter TX, just repeat thestep 3 and 4

5. You are ready to record

Pls Notes: When the APP is not turned on, the lights on the receiver end are all off. The receiver light will only be on after the APP is turned on and the pairing is successful. If the pairing is not successful, it will flash when you open the APP

Be the first to review “Saramonic Blink 500 B3 Lighting Adapter for IOS Device”

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

See It Styled On Instagram

    No access token

Main Menu